Troubleshooting Nominatim Installations
Can a stopped/killed import process be resumed?
"I accidentally killed the import process after it has been running for many hours. Can it be resumed?"
It is possible if the import already got to the indexing stage. Check the last line of output that was logged before the process was killed. If it looks like this:
Done 844 in 13 @ 64.923080 per second - Rank 26 ETA (seconds): 7.886255
then you can resume with the following command:
./utils/setup.php --index --create-search-indices --create-country-names
If the reported rank is 26 or higher, you can also safely add
PostgreSQL crashed "invalid page in block"
Usually serious problem, can be a hardware issue, not all data written to disc for example. Check PostgreSQL log file and search PostgreSQL issues/mailing list for hints.
If it happened during index creation you can try rerunning the step with
./utils/setup.php --create-search-indices --ignore-errors
Otherwise it's best to start the full setup from the beginning.
PHP "open_basedir restriction in effect" warnings
PHP Warning: file_get_contents(): open_basedir restriction in effect.
You need to adjust the
setting in your PHP configuration (
php.ini file). By default this setting may
look like this:
open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/
Either add reported directories to the list or disable this setting temporarily by adding ";" at the beginning of the line. Don't forget to enable this setting again once you are done with the PHP command line operations.
PHP timezeone warnings
The Apache log may contain lots of PHP warnings like this:
PHP Warning: date_default_timezone_set() function.
You should set the default time zone as instructed in the warning in
php.ini file. Find the entry about timezone and set it to
something like this:
; Defines the default timezone used by the date functions ; https://php.net/date.timezone date.timezone = 'America/Denver'
echo "date.timezone = 'America/Denver'" > /etc/php.d/timezone.ini
nominatim.so version mismatch
When running the import you may get a version mismatch:
COPY_END for place failed: ERROR: incompatible library "/srv/Nominatim/nominatim/build/module/nominatim.so": version mismatch
pg_config seems to use bad includes sometimes when multiple versions
of PostgreSQL are available in the system. Make sure you remove the
server development libraries (
postgresql-server-dev-9.5 on Ubuntu)
and recompile (
cmake .. && make).
I see the error "ERROR: permission denied for language c"
nominatim.so, written in C, is required to be installed on the database
server. Some managed database (cloud) services like Amazon RDS do not allow
this. There is currently no work-around other than installing a database
on a non-managed machine.
I see the error: "function transliteration(text) does not exist"
Reinstall the nominatim functions with
and check for any errors, e.g. a missing
I see the error: "ERROR: mmap (remap) failed"
This may be a simple out-of-memory error. Try reducing the memory used
--osm2pgsql-cache. Also make sure that overcommitting memory is
cat /proc/sys/vm/overcommit_memory should print 0 or 1.
If you are using a flatnode file, then it may also be that the underlying filesystem does not fully support 'mmap'. A notable candidate is virtualbox's vboxfs.
I see the error: "clang: Command not found" on CentOS
On CentOS 7 users reported
/opt/rh/llvm-toolset-7/root/usr/bin/clang: Command not found.
Double-check clang is installed. Instead of
make try running
nominatim UPDATE failed: ERROR: buffer 179261 is not owned by resource owner Portal
Several users reported this during the initial import of the database. It's something PostgreSQL internal Nominatim doesn't control. And PostgreSQL forums suggest it's threading related but definitely some kind of crash of a process. Users reported either rebooting the server, different hardware or just trying the import again worked.
The website shows: "Could not get word tokens"
The server cannot access your database. Add
&debug=1 to your URL
to get the full error message.
On CentOS the website shows "Could not connect to server"
could not connect to server: No such file or directory
On CentOS v7 the PostgreSQL server is started with
systemd. Check if
/usr/lib/systemd/system/httpd.service contains a line
so then Apache cannot see the
/tmp/.s.PGSQL.5432 file. It's a good security
feature, so use the
However, you can solve this the quick and dirty way by commenting out that line and then run
sudo systemctl daemon-reload sudo systemctl restart httpd
Website reports "DB Error: insufficient permissions"
The user the webserver, e.g. Apache, runs under needs to have access to the
Nominatim database. You can find the user like
for default Ubuntu operating system for example it's
createuserstep of the installation instructions.
Give the user permission to existing tables
GRANT usage ON SCHEMA public TO "www-data"; GRANT SELECT ON ALL TABLES IN SCHEMA public TO "www-data";
Website reports "Could not load library "nominatim.so"
Example error message
SELECT make_standard_name('3039 E MEADOWLARK LN') [nativecode=ERROR: could not load library "/srv/nominatim/Nominatim-3.1.0/build/module/nominatim.so": /srv/nominatim/Nominatim-3.1.0/build/module/nominatim.so: cannot open shared object file: Permission denied CONTEXT: PL/pgSQL function make_standard_name(text) line 5 at assignment]
The PostgreSQL database, i.e. user
postgres, needs to have access to that file.
The permission need to be read & executable by everybody, but not writeable by everybody, e.g.
-rwxr-xr-x 1 nominatim nominatim 297984 build/module/nominatim.so
chmod a+r nominatim.so; chmod a+x nominatim.so.
When running SELinux, make sure that the context is set up correctly.
When you recently updated your operating system, updated PostgreSQL to
a new version or moved files (e.g. the build directory) you should
cd build rm -r module/ cmake $main_Nominatim_path && make
Setup.php fails with "DB Error: extension not found"
Make sure you have the PostgreSQL extensions "hstore" and "postgis" installed. See the installation instructions for a full list of required packages.
I forgot to delete the flatnodes file before starting an import.
That's fine. For each import the flatnodes file get overwritten. See https://help.openstreetmap.org/questions/52419/nominatim-flatnode-storage for more information.
Running your own instance
Can I import negative OSM ids into Nominatim?
Missing XML or text declaration
The website might show:
XML Parsing Error: XML or text declaration not at start of entity Location.
Make sure there are no spaces at the beginning of your